Technical Concept- Cleaners and Degreasers | Importance and Types of Cleaners

Technical Concept- Cleaners and Degreasers | Importance and Types of Cleaners

August 11, 2025

Industrial cleaning is no longer low-tech. Industrial cleaning is considered to be an essential part of every industry. Industrial cleaning is the act of cleaning of unwanted particles in industrial facilities such as factories, warehouses, power plants and other types of industrial facilities. Industrial Cleaners are chemical solutions which are specially formulated to clean or remove oil, dust, dirt, grease, anti-seize, gear oils contaminants & other impurities from the metal surface.

Frequently Asked Questions- Industrial Cleaners

Thinners

Thinners are referred to as mineral spirits. Mineral spirits are also recognized as white spirits, which are made up of hydrocarbons that are leftover from petroleum distillates of the oil refining process. A thinner solvent is used for cleaning in industries.

Solvent Cleaners

Solvent Based Cleaners are liquids which are used to clean contaminants. It utilizes either a unique solvent, blend of solvents, or a blend of solvents and other compounds to maximize performance parameters for a selected application. Many users prefer thinners over Solvent cleaners, But this may not lead to desired results. The reasons mentioned below justify the above statement.

Thinner

Pros- Readily available in the market Economical Effectively works for degreasing of equipment.

Cons- Hazardous to health,leaves an oily film after cleaning and degreasing.
Very low Flashpoint, Highly flammable, Incompatibility with few materials

Solvent Cleaner

Pros- Can be altered ( or developed ) depending upon the application requirement relatively higher flash point. Safer to handle works effectively on most inorganic and organic contaminants can be used over an extended temperature range

Cons- Hazardous to health. Relatively expensive

Solvent Cleaners are usually used in an application where water exposure is not recommended in the application. For other applications where water avoidance is not a condition, Water Based cleaners are usually recommended. Water incidentally is a subsection category of solvent. It is categorized as Universal Solvent as it dissolves more substances than any other liquid. Water is been used as a primary solvent in a water-based cleaner. However, it can be further fortified with many of the solvents and detergents, pH modifiers and a variety of other compounds. Water-based cleaners remove contaminants not only by dissolving contaminants, but they also at times chemically react with the contaminants and make them more readily dissolvable in water leaving a clean surface behind.

Solvent Cleaner

Pros- Can be altered (or developed) depending upon the application requirement relatively higher Flash point, Safer to handle works effectively on most inorganic and organic contaminants can be used over an extended temperature range.

Cons- Hazardous to health relatively expensive.

Water- based Cleaner

Pros- Compatible with most of the materials. Effectively cleans organic contaminants. Non-hazardous to health.Easy to handle and the store is non – flammable. It reduces disposal cost.

Cons- Evaporation Rate is the low- temperature range for cleaning is low.

Types Of Water Based Cleaners

Based on high and low-temperature applications and different pH values, water-based cleaners are usually classified as:

1. Alkaline Cleaners
2. Acidic Cleaners
3. Neutral Cleaners

Alkaline Cleaners

Alkaline cleaning agents are mainly used for removal of organic deposits such as dirt, oils & grease. They are particularly effective because these materials saponify fats and oils while neutralizing any acidic soils. They are more effective to clean organic soils such as dirt, oils & greases.

Note: Saponification is the process of creating soap from the interaction of alkaline materials with fatty acid lubricants.

Acidic Cleaners

Acidic cleaning agents are mainly used for removal of inorganic deposits such as weld and laser scales and other oxides such as rust. The active ingredients are normally strong mineral acids.

Often, surfactants and corrosion inhibitors are added to the acid, since acid used to neutralise alkalis.

Neutral Cleaners

Neutral Cleaner is an effective universal cleaner, which can be utilized for cleaning all water-safe surfaces. The pH of the product is neutral which makes it well suited for cleaning a polished surface. It is also well suited for use in spray bottles

Importance Of Cleaning

Effective Cleaning is expected to:

1. Reduce downtime
2. Increase productivity
3. Increase equipment lifespan
4. Avoid contamination related concerns

Downtimes are unplanned stops in the production line due to equipment failure and eventual breakdowns. It is the single largest source of loss of production, which hampers the productivity of industry voluminously.

Effective industrial cleaners have the potential to be very effective in terms of performance. However, the cleaning ability depends on what is being cleaned, a substrate being cleaned and the process constraints. All the three parameters must work in tandem for the best cleaning results.

To choose between a water-based cleaner or a solvent cleaner or simple thinner, one must evaluate the application, other requirements, and eventual goals. One must consider performance, safety, and economical solution. 

A good cleaner that is made specifically for removing contaminants may not remove machine greases such as synthetic greases, dielectric greasehigh-temperature grease etc. A cleaner that works well on stainless steel may not be compatible with aluminium and a cleaner that removes machining oil may not be clean enough for greases from machines.

The bottom line is that it’s difficult to make an overall reliable judgment of the supremacy of a type of cleaners without evaluating the unique situation of the user. Luckily, even with the ever-mounting regulations, there are still multiple choices that include both solvents and water-based cleaners.

Explore Relevant Blogs

The Rise of Specialty Lubricants for Electric Vehicles
Industry Information

The Rise of Specialty Lubricants for Electric Vehicles

Ensuring Reliable Performance with Advanced Contact  Greases  The rapid adoption of elect...

July 16, 2025

Read Blog
Equipment Reliability Linked with  Lubrication and Lubricants
Discover

Equipment Reliability Linked with Lubrication and Lubricants

In today’s competitive industrial landscape, equipment reliability is no longer just a  m...

July 16, 2025

Read Blog
Myths About Bearing Lubrication
Discover

Myths About Bearing Lubrication

In industrial operations, bearing failure can result in unexpected downtime, increased  mainten...

July 16, 2025

Read Blog
Understanding Grease Bleeding
Discover

Understanding Grease Bleeding

Essential Insights for  Industrial Lubricants and Specialty Greases  In the world of indu...

July 16, 2025

Read Blog
The 5 Rights of Lubrication
Discover

The 5 Rights of Lubrication

In industries where machinery is the backbone of productivity, lubrication plays a pivotal role &nbs...

July 16, 2025

Read Blog
Rethinking Lubrication for Gears in BLDC Motors : Challenges, Innovations and the Way Forward
Discover

Rethinking Lubrication for Gears in BLDC Motors : Challenges, Innovations and the Way Forward

Introduction & Market Landscape Brushless DC (BLDC) motors have emerged as the powerhouse behin...

July 19, 2025

Read Blog
The Ultimate Guide To Grease Thickeners [Thickening Agents]
Discover

The Ultimate Guide To Grease Thickeners [Thickening Agents]

Grease Thickeners – In simple words thickeners are the thickening agents...

August 08, 2025

Read Blog
The Difference Between Synthetic Oil and Mineral Oil
Discover

The Difference Between Synthetic Oil and Mineral Oil

Table Of Contents Introduction  What Is Mineral Oil? W...

August 11, 2025

Read Blog
7 Great Reasons How A Well Lubricated Machine Can Help Your Business Grow
Discover

7 Great Reasons How A Well Lubricated Machine Can Help Your Business Grow

– Is your machine breaking down sooner than it should?– Are simply the movin...

August 11, 2025

Read Blog
9 Hot Trends In Lubrication
Discover

9 Hot Trends In Lubrication

Understanding lubrication is always a very important aspect of machinery and is always taken for gra...

August 11, 2025

Read Blog
Open Gear Lubrication- Are you using the right open gear lubricant?
Discover

Open Gear Lubrication- Are you using the right open gear lubricant?

Power transmission: Open gears While visiting mines and similar sites, it&...

August 11, 2025

Read Blog
5 Factors causing lubricant contamination
Discover

5 Factors causing lubricant contamination

Lubricant contamination control One of the important functions of lubrication i...

August 11, 2025

Read Blog
Benefits of Appropriate Lubrication Practice
Discover

Benefits of Appropriate Lubrication Practice

Before understanding lubrication benefits, let us first understand about Appropriate Lub...

August 11, 2025

Read Blog
Overcoming the foremost Common Misconceptions of Lubrication
Discover

Overcoming the foremost Common Misconceptions of Lubrication

After working closely with industrial personnel, we came across a few misconceptions abo...

August 11, 2025

Read Blog
Top Four Traits of Synthetic Lubricants in Industrial Applications
Discover

Top Four Traits of Synthetic Lubricants in Industrial Applications

Synthetic lubricants (Synthetic Oil & Grease) have been used in industrial appl...

August 11, 2025

Read Blog
Mosil Lubricants, Adding Value to Lubrication Excellence
Discover

Mosil Lubricants, Adding Value to Lubrication Excellence

Many organizations have the opportunities for considerable financial benefits from lubri...

August 11, 2025

Read Blog
Need for Chain Lubrication | Different Chain Lubrication Methods
Discover

Need for Chain Lubrication | Different Chain Lubrication Methods

Chain Drive Lubrication Mainly, chain drives are ...

August 11, 2025

Read Blog
Gear Drive Lubricant Selection [Gearbox Lubricants]
Discover

Gear Drive Lubricant Selection [Gearbox Lubricants]

Gear Drive/ Gearbox Lubricant Properties Selecting proper gearbox lub...

August 11, 2025

Read Blog
Disposal Of Used Oil and Waste Lubricants
Discover

Disposal Of Used Oil and Waste Lubricants

Waste Management & Disposal Of Lubricant Waste ...

August 11, 2025

Read Blog
Strength of an idea …. is the story you weave around it
Discover

Strength of an idea …. is the story you weave around it

Specialty lubricants is considered highly technical domain and it has to lead me to read and prepare...

August 11, 2025

Read Blog
Signals Vs Noise – That’s what Leaders do
Discover

Signals Vs Noise – That’s what Leaders do

When working with an organisation, one realises that an organisation is essentially an amplifie...

August 11, 2025

Read Blog
Solve a problem, Sale would happen
Discover

Solve a problem, Sale would happen

Quite often I come across a request that a particular industrial lubricant is required because a cus...

August 11, 2025

Read Blog
Contact Lubricants For EVs (Electric Vehicles)
Discover

Contact Lubricants For EVs (Electric Vehicles)

Don't You Dare Run Your EV Without Good Contact Lubricants! ...

August 11, 2025

Read Blog
Significance of viscosity index in lubricants
Discover

Significance of viscosity index in lubricants

Technical Concept: Viscosity Index To begin ...

August 11, 2025

Read Blog
Choosing the Reliable Lubricant Manufacturer and Supplier
Discover

Choosing the Reliable Lubricant Manufacturer and Supplier

How to select the right Lubricant Manufacturer/ Supplier? ...

August 11, 2025

Read Blog
What is Rust? How to Prevent it?
Discover

What is Rust? How to Prevent it?

Rust- An Age Old Problem In industries, specifically manufacturin...

August 11, 2025

Read Blog
Bearing failure due to water | Bearing failure analysis
Discover

Bearing failure due to water | Bearing failure analysis

Did you know? It only needs a small amount of wat...

August 11, 2025

Read Blog
Lubricating aspects of anti friction ball and roller bearings
Discover

Lubricating aspects of anti friction ball and roller bearings

Operating Principle of Anti-friction Bearing Anti...

August 11, 2025

Read Blog
Choosing An Electrical Component Cleaner | Ideal Characteristics
Discover

Choosing An Electrical Component Cleaner | Ideal Characteristics

Electrical Component Cleaner: Ideal Characteristics ...

August 11, 2025

Read Blog
Aerosol and It’s Propellant
Discover

Aerosol and It’s Propellant

Aerosols play a very important role in maintenance of any type of industry since it...

August 11, 2025

Read Blog
Understanding Moly in Lubricants
Discover

Understanding Moly in Lubricants

Moly – Molybdenum disulfide is commonly found in a variety of Industrial lubricant...

August 11, 2025

Read Blog
Gamma Irradiation Tests for Industrial Lubricants
Discover

Gamma Irradiation Tests for Industrial Lubricants

Gamma Radiation in Lubricants The Gamma radiation is generated by the decay of ...

August 11, 2025

Read Blog
The Impact Of Covid-19 on Lubricant Market
Discover

The Impact Of Covid-19 on Lubricant Market

Lockdown & Lubrication | The Impact of Lockdown and Pandemic On Lubricant Market ...

August 11, 2025

Read Blog
Sterile Lubricants for Pharmaceutical Applications
Discover

Sterile Lubricants for Pharmaceutical Applications

Importance of Sterile Lubricants What is Ste...

August 11, 2025

Read Blog
Cleanliness or Quality
Discover

Cleanliness or Quality

Which is more important for lubricant?   Ma...

August 11, 2025

Read Blog
Degradation of Oil
Discover

Degradation of Oil

Ever heard, “Toxic people pollute everything around them", this is also true with ...

August 11, 2025

Read Blog
What is a Non-Melt Grease/ Non-Drip Grease | Important Facts of Non-Melt Grease
Discover

What is a Non-Melt Grease/ Non-Drip Grease | Important Facts of Non-Melt Grease

Non-melt Grease popularly known as Non-drip Grease is a high–performance lubr...

August 11, 2025

Read Blog
Types of Lubrication Methods Used in Industries
Discover

Types of Lubrication Methods Used in Industries

Importance of Lubrication! Appropriate lubrication is an important factor to be...

August 11, 2025

Read Blog
Bearing Lubrication: Challeges Faced and Steps For Lubrication
Discover

Bearing Lubrication: Challeges Faced and Steps For Lubrication

Bearings are rotating and rolling elements used in machines. Bearing Lubricants are impo...

August 11, 2025

Read Blog
Specialty Lubricants For Pharmaceutical Industries
Discover

Specialty Lubricants For Pharmaceutical Industries

Over few years, increasing interest is seen in the use of food grade lubricants&nbs...

August 11, 2025

Read Blog
Industrial Lubricants
Discover

Industrial Lubricants

Basics and importance of Industrial Lubricants As we all know, lubrication is e...

August 11, 2025

Read Blog
Lubrication linked with a maintenance strategy
Discover

Lubrication linked with a maintenance strategy

Regular Maintenance is frequently considered as an evil necessity and often delayed or c...

August 11, 2025

Read Blog
Oil VS Grease | What is the difference?
Discover

Oil VS Grease | What is the difference?

Debate 1.0 Oil VS Grease Many people who insists ...

August 11, 2025

Read Blog
What are Solid Lubricants? | Types and Benefits of MoS2, PTFE and Graphite
Discover

What are Solid Lubricants? | Types and Benefits of MoS2, PTFE and Graphite

Solid lubricants - Unique Lubrication The major challenge was faced by the Lubr...

August 11, 2025

Read Blog
Lubrication Film Strength
Discover

Lubrication Film Strength

Importance of Film strength of A lubricant !! &nb...

August 11, 2025

Read Blog
Tips for Smarter lubrication
Discover

Tips for Smarter lubrication

Smarter Lubrication   In this article, we will disc...

August 11, 2025

Read Blog
Development Of Lubricant Industry in Next 5 years| 2021
Discover

Development Of Lubricant Industry in Next 5 years| 2021

Current scenario of global lubricant market India is the Third largest Lubrican...

August 11, 2025

Read Blog
Technical Concept- Cleaners and Degreasers | Importance and Types of Cleaners
Discover

Technical Concept- Cleaners and Degreasers | Importance and Types of Cleaners

Industrial cleaning is no longer low-tech. Industrial cleaning is considered to be an es...

August 11, 2025

Read Blog
Technical Concept- Anti-seize compounds | Problems occurred due to seizing | Choosing your Anti-seize
Discover

Technical Concept- Anti-seize compounds | Problems occurred due to seizing | Choosing your Anti-seize

What is Anti-seize? What is seizing? Before explaining to you about Anti-s...

August 11, 2025

Read Blog
Technical Concept – Aerosols: Principle, Techniques and Application
Discover

Technical Concept – Aerosols: Principle, Techniques and Application

What are Aerosols? | Principles Of Aerosol Aerosol spray is a type of gase...

August 11, 2025

Read Blog
Technical Concept – Wire Rope and it’s Lubrication
Discover

Technical Concept – Wire Rope and it’s Lubrication

Understanding Wire Rope and it's Lubrication Wire Rope is a critical compo...

August 11, 2025

Read Blog
Industrial Lubricants Forecast Report 2022
Discover

Industrial Lubricants Forecast Report 2022

The industrial lubricants market is fast growing, and the demand for these pro...

August 11, 2025

Read Blog
Industrial Lubricants Market Size
Discover

Industrial Lubricants Market Size

The Rise Of Industrial Lubricants Market The importanc...

August 11, 2025

Read Blog
Tips for Choosing Right Gear Oil Lubricant
Discover

Tips for Choosing Right Gear Oil Lubricant

Overview: Gear Oil Gear oils are designed to protect gears, bearings,...

August 11, 2025

Read Blog
Guidelines for Corrosion Prevention
Discover

Guidelines for Corrosion Prevention

Corrosion Management Products Corrosion Prevention is crucial as d...

August 11, 2025

Read Blog
5 Attributes to Select the Right Grease for Your Equipment Needs
Discover

5 Attributes to Select the Right Grease for Your Equipment Needs

Looking at these below 5 attributes for selecting the right type of lubricating gre...

August 11, 2025

Read Blog
Tips on Picking out Industrial Lubricants
Discover

Tips on Picking out Industrial Lubricants

  Choosing the right industrial lubricants requires giving into detail not only individual n...

August 11, 2025

Read Blog
Beyond Business : Ensuring smooth Innovation
Beyond Business

Beyond Business : Ensuring smooth Innovation

In the world of high-performance lubricants, every part matters.And when it comes to building a be...

September 04, 2025

Read Blog
Tribotsav 2025: Tribotsav: Spirit of Togetherness
News

Tribotsav 2025: Tribotsav: Spirit of Togetherness

At Mosil, we believe our people are the true strength of our success story. To honor their contribut...

September 12, 2025

Read Blog
Contact Us
AI Search or Ask Anything